ABC Locksmith School - www.LocksmithDVD.com

Auto 1 focused on making keys for cars where all of the locks were original locks and in good working condition.  Quite often locksmiths receive calls where the ignition lock is not working or it is not an original lock.  Auto 2 teaches skills that will help in these situations.

After completing this course you will have more of the basic skills needed to do automotive locksmithing.  Most of the examples in this course focus on Ford, Mercury, & Lincoln vehicles. However, many of the skills apply to all makes and models.  This course does not cover high security autos.  Those skills will be covered in a later course.

Each skill should be practiced until the locksmith is confident in his ability to complete the task.

This course is divided into 17 parts:

• Part 1 - Tools
• Part 2 - A Closer Look at Fill Programs
• Part 3 - A Closer Look at A-1 kit for Ford
• Part 4 - Remove Ford 8 cut lock using A1 kits
• Part 5 - Additional Info on Picking the Ford 8 Cut Lock
• Part 6 - Disassemble and Decode the Ford 8 Cut Lock
• Part 7 - Cut a Key using the Pak-A-Punch
• Part 8 - Reassemble and Replace Ford 8 cut Lock
• Part 9 - Closer look at the Aable kit
• Part 10 - Remove Ford 8 Cut using Aable kit
• Part 11 - Drill Ford 8 cut
• Part 12 - Remove Ford 8 Cut using Aable force tool
• Part 13 - Code a Ford ignition lock
• Part 14 - Picking a Ford 8 cut non-sidebar lock
• Part 15 - Ford Focus Style Locks
• Part 16 - 2003 Ford Focus — Remove and Install Ignition Lock
• Part 17 - Review and Practice

After viewing this course you should be able to:

1.   List the most often recommended steps for making a car key

2.   Explain the wild card features of a fill program

3.   Describe how to use the A-1 ignition pick tools

4.   Explain how to use the Aable ignition pick tools

5.   Explain how to use the Aable force tool

6.   To remove a standard Ford 8 cut ignition lock

7.   To disassemble a standard Ford 8 cut ignition lock

8.   To decode a standard Ford 8 cut ignition lock

9.   To code up a standard Ford 8 cut ignition lock

10. To assemble a standard Ford 8 cut ignition lock

11.  To drill and remove a standard Ford 8 cut ignition lock

12.  To use the Pak-A-Punch key clipper

13.  To disassemble a Focus style lock

14.  To assemble a Focus style lock